Altigen Altiware OE 4.5 Скачать руководство пользователя страница 327

Страница: 327 / 455

Setting up an Exchange Server

298

AltiWare OE System Installation & Administration Manual

To check that all Exchange Server Services Have Started:

Open the Control Panel and click the Services icon to view the
Services window.

Figure 22.

Exchange Server Services Window

Check the status of the following services to see if they are started:

• Microsoft Exchange Event

• Microsoft Exchange IMAP4

• Microsoft Exchange Information Store

• Microsoft Exchange MTA Stacks

• Microsoft Exchange POP3

• Microsoft Exchange Routing Engine

• Microsoft Exchange Site Replication Service

• Microsoft Exchange System Attendant

If any of these services are not started, select the service and click the
Start arrow in the Services window to start it.

If a service cannot be started, contact Microsoft technical support.

Содержание Altiware OE 4.5








































































































































































































































































































































































































































































Результаты поиска

Содержание Altiware OE 4.5

Отзывы:

Altigen Altiware OE 4.5, Руководство по системному администрированию и установке, Страница: 327 / 455

Результаты поиска

Содержание Altiware OE 4.5

Отзывы: