Altigen Altiware OE 4.5 Скачать руководство пользователя страница 26

Страница: 26 / 455

Liability & Warranty

AltiWare OE System Installation & Administration Manual

xxv

How Long the Warranty Is Effective

All AltiGen Communications products are warranted for one (1) year for
all parts from the date of the first end user purchase.

Whom the Warranty Protects

This warranty is valid only for the first end user purchaser.

What the Warranty Does Not Cover

1. Any product on which the serial number has been defaced, modified or

removed.

2. Damage, deterioration or malfunction resulting from:

a) Accident, misuse, neglect, fire, water, lightning, or other acts of

nature, unauthorized product modification, or failure to follow
instructions supplied with the product.

b) Repair or attempted repair by anyone not authorized by AltiGen

Communications.

c) Any damage of the product due to shipment.

d) Removal or installation of the product.

e) Causes external to the product, such as electric power fluctuations

or failure.

f) Use of supplies or parts not meeting AltiGen Communications’

specifications.

g) Normal wear and tear.

h) Any other cause which does not relate to a product defect.

3. Shipping, installation, set-up and removal service charges.

How to Obtain Service

End user customers should contact your Authorized AltiGen Dealer for
service.

Authorized AltiGen Dealers must follow the steps below for service:

Содержание Altiware OE 4.5








































































































































































































































































































































































































































































Результаты поиска

Содержание Altiware OE 4.5

Отзывы:

Altigen Altiware OE 4.5, Руководство по системному администрированию и установке, Страница: 26 / 455

Результаты поиска

Содержание Altiware OE 4.5

Отзывы: