D000161-00 Rev. C
15
Close the red safety latches located on the front height adjusters and secure them with the
spring loaded safety pins.
CAUTION: Never operate the Anti-Gravity Treadmill without the safety latches closed
and locked in place (Figure 5). This is an essential safety item that prevents the oval
support frame from inadvertently disengaging from the height adjusters during
exercise.
You should never attempt to move the frame while the enclosure is inflating or when fully
inflated. If you discover while you are exercising that you need to reposition the enclosure, end
or pause your workout on the touch screen control panel, then change the height of the support
frame.
Zipping Into the Enclosure
Once the oval support frame is in place, zip yourself into
the Anti-Gravity Treadmill. The zipper should be started
at the front and center of your body (figure 6) and
zipped counter-clockwise all the way around until it
returns to overlap in the front. Make sure that the zipper
is completely closed.
Attaching the Safety Lanyard
It is essential that you always use the magnetic safety lanyard supplied with the machine. Clip
one end of the lanyard to your shirt at waist level (Figure 7). Place the magnet directly over the
rectangular area on the console labeled “Magnet Here” (Figure 8) or the machine will not
operate.
The lanyard and magnet serve as a safety switch mechanism. Should you fall while exercising,
the magnet is pulled off the console and power is cut to the treadmill. The treadmill running
surface disengages from its drive and can move freely in this condition.
CAUTION: Never attempt to defeat this critical safety feature by clipping the lanyard
to the enclosure, structure of the machine or anywhere else other than your shirt.
Figure 6
Figure 7
Figure 8
