D000161-00 Rev. C
30
1. Remove the enclosure from the frame and thoroughly vacuum the interior of the
treadmill. See instructions that follow.
2. Vacuum any dust accumulated on the screens located inside the blower intake tubes on
either side of the front of the machine.
Seasonally:
In autumn & winter the drier climate in many regions of the country will cause a greater static
build up to occur when the treadmill is used. Spray the running surface with a staticide spray to
prevent static shock to treadmill users and to prevent interference with the treadmill’s electronic
systems.
Cleaning the Enclosure Windows
The windows on your Anti-Gravity Treadmill are made of Strataglass™. Special care must be
taken to ensure they remain clean and clear. IMAR™ Strataglass cleaner is recommended for
cleaning the clear windows.
NOTE: If your Anti-Gravity Treadmill is exposed to the sun, it is necessary to order a special
window cleaner that contains UV protection. For a list of retailers and distributors in your area,
contact AlterG or visit Amazom.com and order the IMAR™ Strataglass protective cleaner. If you
have any problems with your Strataglass, contact AlterG immediately.
*IMAR is a trademark of IMAR Products, LLC. Manassas, VA.
Height Adjusters & Latch Mechanism
The height adjusters function as an essential safety mechanism in the event that a user falls. It
is of utmost importance that they are checked before each use. Make sure they are not loose or
cracked in any way and the oval-shaped support frame fits fully into them. Check to make sure
the notches are not worn. Inspect the red safety latches that secure the oval support frame in
the notches. Make sure they function smoothly, close fully, and are always pinned closed during
use.
Shorts
Always remove your shoes when getting in and out of the shorts. Keeping your shoes on while
putting on the shorts puts a great deal of stress on their seams and will significantly reduce the
life of your shorts.
Wash the shorts frequently to keep them sanitary.
Hand wash or use a gentle wash cycle
with cold water and let air dry. Do not put the shorts in the dryer!
If any part of the shorts wear out (wire, seams, etc.) discontinue use.
Touch Screen
The touch screen will eventually get covered with fingerprints. When cleaning the touch screen
use a micro fiber cloth dampened with soap and water to avoid scratching the screen surface.
Make sure you turn the machine off when cleaning the screen as you will be applying pressure
that the computer may recognize as a touch.
