Alpha Technologies Novus 1250T Скачать руководство пользователя страница 3

Страница: 3 / 79

THE ALPHA NOVUS P1250 AND 1250T

IMPORTANT SAFETY PRECAUTIONS

Novus 1250T and P1250 UPS Safety Checklist

Only qualified personnel should service the UPS.

Carefully unpack the UPS and report any shipping damage at once.

Read this operator’s manual. If you have any questions about safe
installation, operation or maintenance, contact Alpha Technologies.

Install the UPS upright in a well ventilated area.

Verify the UPS’s output voltage meets the voltage and current
requirements of the equipment to be protected. Do the same for the
line voltage and current input into the UPS.

The UPS should be installed on a dedicated, circuit breaker
equipped line.

Alert fire, emergency and service personnel a UPS is installed by
placing a warning label on the electrical panel and the host equip-
ment.

When connecting a load, make sure it does not draw more power
than the UPS provides.

Use proper lifting techniques when lifting the UPS (weight is 75 lbs,
34 kg).

The UPS has more than one live circuit. Even if line power is not
present at the input, power can be present at the output.

SAVE THESE INSTRUCTIONS

Содержание Novus 1250T
















































































Результаты поиска

Содержание Novus 1250T

Отзывы:

Похожие инструкции для Novus 1250T

Бренды по названию

Популярные бренды

Alpha Technologies Novus 1250T, Руководство оператора

Результаты поиска

Содержание Novus 1250T

Отзывы:

Похожие инструкции для Novus 1250T

Бренды по названию

Популярные бренды