ALMAC MULTI-LOADER 6.0, Перевод оригинальной инструкции

Страница: 86 / 127

PAGE
86 ALMAC s.r.l.
6.2.8.3 Recharging
The batteries are recharged by connecting to the 110V or 220V mains power
supply.
Do not charge the batteries with current valueshigher than those indicated in
the technical specifications and recommended in the instructions, it could cause
dangerous overheating and a drastic reduction in the life of the battery series.
The Lead Crystal batteries must be recharged mainly by enabling both
battery chargers (40A).
The use of the single battery charger must always take
place in cases of extreme necessity and occasionally.
Attention!! Continuously using only one 20A charger will damage the
batteries.
The Lead Crystal batteries can be recharged only with the battery chargers on
board the machine, in case of a different charging system, contact ALMAC
company for authorisation.
NEVER SMOKE, CREATE SPARKS OR FLAMES NEAR BATTERIES AND BATTERY
CHARGERS: EXPLOSION RISK.
6.2.8.4 Battery storage
Recharge the battery at least every three to four months.
In the event of prolonged immobilisation, charge 100% before storage and before
re-use. In all cases, the storage and maintenance recharges must be performed
through the use of the battery chargers on board the machine and both must be
enabled.
Make sure the batteries are stored in areas out of the reach of children.
DO NOT USE CHARGE MAINTENERS, BATTERY TENDERS, FAST CHARGERS OR
OTHER SIMILAR DEVICES. ONLY USE THE BATTERY CHARGER PROVIDED.
DO NOT CHARGE THE BATTERY BEYOND THE MAXIMUM VOLTAGE INDICATED.