PAGE
107
ALMAC s.r.l.
6.2.17
Track reduction gear oil level inspection
Check the level of the oil in the track reduction gears at the frequencies given in
the general chart. Comply with the procedure described below.
This model features dual displacement gear motors with gears in oil bath.
It is very important to periodically check the oil level (frequency indicated in the
scheduled maintenance and checks table).
1-
Move until the gear motor is in the condition in which the "FILL" cap is at
the top, and perpendicular to the "DRAIN" cap.
2-
To drain the oil:
a.
Unscrew the FILL cap;
b.
Unscrew the LEVEL cap.
3-
Once the gear unit has been emptied, translate until the geared motor
moves to the condition in which the "FILL" plug is at the top and
perpendicular to the "DRAIN" plug.
4-
To top up the oil:
a.
using a syringe, add oil through the FILL cap, until the oil comes out
of the LEVEL cap.
5-
Screw the LEVEL cap back on.
6-
Screw the FILL cap back on.
USE Shell SPIRAX S3 AX 80W/90 OIL
Содержание MULTI-LOADER 6.0
