ALMAC MULTI-LOADER 6.0, Перевод оригинальной инструкции

Страница: 15 / 127

PAGE
15 ALMAC s.r.l.
MULTI-LOADER
20
°
25
°
25
°
15
°
Adhesive with maximum inclinations of the ground dangerous due to the risk of
overturning and sliding in travel
Note: The inclinations listed on the plate above refer to those LIMITS that cannot
be exceeded with the machine. Almac s.r.l. has provided on the platform an
electronic control system that limits translation of the machine upon exceeding
of the maximum inclinations permitted.
The plates are affixed to the machine for the purpose of helping the operator
and/or warning him of the risks to which he may be exposed when he uses the
machine. In no way does the information on the plates substitute this Manual,
which is the only reference document containing complete information.
Comply with the indications on the sign plates. Failure to comply with these
indications may result in serious injuries and even death, and in any case could
endanger the operators and/or exposed persons. Make sure that the sign plates
are always affixed and legible. If this is not the case, they must be fastened
back in place or replaced.
Maximum inclination of the ground:
• Front inclination of the ground: The maximum front inclination of
the ground to stay safe is 25°. There is no electronic control for this
condition, which is at the discretion of the operator.
• Lateral inclination of the ground: The maximum lateral inclination
of the ground, keeping the frame as level as possible, to stay safe is 25°.
There is no electronic control for this condition, which is at the discretion
of the operator.
• Lateral inclination of the ground with a narrow track: The
maximum lateral inclination of the ground, with a narrow track, to stay
safe is 15°. There is no electronic control for this condition, which is at
the discretion of the operator.