7
Chapter 7
Setup - Client Mode
This Chapter details configuration for Client Mode.
Overview
You can NOT connect to the ALL0274 while it is in Client mode. Configuration for Client
mode must be performed while in Config Mode.
Connecting
1. Use the mode selector switch on the side on the ALL0274 to select "Config" mode.
2. Power up and wait for the Wireless LED to turn on. This indicates the ALL0274 is ready.
3. Establish a Wired or Wireless connection to the 3-in-1.
•
Wired
- connect a standard LAN cable from your PC's 10/100BaseT Ethernet port to
the Ethernet port on the ALL0274.
•
Wireless
- select the wireless network with the SSID
default
4. Start your Web browser.
5. In the "Location" or "Address" bar, enter the following:
config.ap
Note
: This will work only while in
Config
mode.
6. If the admin password has been set (on the
System
screen), you will be prompted for the
username and password.
•
Enter
admin
for the user name.
•
Enter the current password.
7. You will then see the
Mode Configuration
screen.
Click the "Config" button for
Client Mode
, to view the
Client Setup
screen.
62
