PC Configuration
External
(WAN) Ports.
Traffic from the Internet using this range of port numbers will be
sent to the selected Server. These ports are normally the same as
the Internal Port Numbers. If they are different, this device will
perform a "mapping" or "translation" function, allowing the server
to use a different port range to the clients. Using this feature allows
the the server to distinguish traffic from the WAN from traffic on
the local LAN by using the port number, rather than having to
check IP addresses.
Buttons
Delete
Delete the current Virtual Server entry. Note that the pre-defined
Servers can not be deleted.
Defaults
This will delete any Servers you have defined, and set the pre-
defined Servers to use their default names and port numbers.
Disable All
This will cause the "Enable" setting of all Virtual Servers to be set
OFF.
Clear Form
Clear all data from the "Properties" area, ready for input of a new
Virtual Server entry.
Update
Selected
Server
Update the current Virtual Server entry, using the data shown in the
"Properties" area on screen.
Add as
new Server
Add a new entry to the Service list, using the data shown in the
"Properties" area on screen. The entry selected in the list is ignored,
and has no effect.
51
