ALL0274 User Guide
Error: PPP Connection
failed
Unable to establish a PPP connection with the ISP's Server.
This could be a login problem (name or password) or a Server
problem.
Error: Connection to
Server lost
The existing connection has been lost. This could be caused
by a power failure, a link failure, or Server failure.
Error: Invalid or unknown
packet type
The data received from the ISP's Server could not be proc-
essed. This could be caused by data corruption (from a bad
link), or the Server using a protocol which is not supported by
this device.
PPTP
If using PPTP (Peer-to-Peer Tunneling Protocol), a screen like the following example will be
displayed when the
Status
button is clicked.
Figure 17: PPTP Status Screen
Data - PPTP Screen
Connection
Physical Address
The hardware address of this device, as seen by remote devices on
the Internet. (This is different to the hardware address seen by
devices on the local LAN.)
IP Address
The IP Address of this device, as seen from the Ethernet (WAN) Port
interface. If using DHCP, and there is no current connection, this will
be blank or 0.0.0.0.
PPTP Status
This indicates whether or not the connection is currently established.
•
If the connection does not exist, the
Connect
button can be used
to establish a connection.
•
If the connection currently exists, the
Disconnect
button can be
40
