Introduction
Physical Features
Ethernet LED
•
On - Ethernet connection established.
•
Off - No Ethernet connection.
•
Flashing - Data being transferred.
Wireless LED
•
On - Wireless interface available.
•
Off - Wireless interface unavailable.
•
Flashing - Data being transferred.
Power LED
•
On - Power is available.
•
Off - No power.
Mode Selector
This switch has 4 positions:
1 - AP Mode
2 - AP/Router Mode
3 - Config Mode
4 - Client Mode
Reset Button
This button has 2 functions:
•
Restart
(reboot) - press & release.
•
Set all settings to factory defaults
- press & hold (for 8 seconds),
then release.
Note: This should not be done while connected or using the
ALL0274.
Ethernet Port
Connect the 10/100BaseT ethernet cable here.
•
In
AP mode
or
AP/Router mode
, this is connected to the LAN or
WAN.
•
In
Config mode
, this should be connected to your PC.
•
In
Client mode
, this is connected to your PC.
Power
Connect the supplied power adapter here.
3
