Setup
4
Chapter 4
Setup - AP Mode
Overview
This Chapter provides Setup details for the AP mode of the ALL0274.
Overview
You can NOT connect to the ALL0274 while it is in AP (Access Point) mode. Configuration
for AP mode must be performed while in Config Mode.
Note:
By default, the ALL0274 will allow both 802.11b and 802.11g connections.
Connecting
1. Use the mode selector switch on the side on the ALL0274 to select "Config" mode.
2. Power up and wait for the Wireless LED to turn on. This indicates the ALL0274 is ready.
3. Establish a Wired or Wireless connection to the 3-in-1.
•
Wired
- connect a standard LAN cable from your PC's 10/100BaseT Ethernet port to
the Ethernet port on the ALL0274.
•
Wireless
- select the wireless network with the SSID
default
4. Start your Web browser.
5. In the "Location" or "Address" bar, enter the following:
config.ap
Note
: This will work only while in
Config
mode.
6. You will be prompted for the username and password.
•
Enter
admin
for the user name.
•
Enter the current password. The default value is
password
7. Select
AP Setup
from the main (top) menu.
15
