ALL0274 User Guide
Buttons
Defaults
This will delete any Servers you have defined, and set the pre-
defined Servers to use their default port numbers.
Disable All
This will cause the "Enable" setting of all entries to be set OFF.
Update Selected
Server
Update the current entry, using the data shown in the "Properties"
area on screen.
Add as new Server
Add a new entry to the list, using the data shown in the "Properties"
area on screen. The entry selected in the list is ignored, and has no
effect.
Delete
Delete the current Server entry. Note that the pre-defined Servers
can not be deleted. Only Servers you have defined yourself can be
deleted.
Clear Form
Clear all data from the "Properties" area, ready for input of a new
entry.
For each entry, the PC must be running the
appropriate Server software.
Defining your own Servers
If the type of Server you wish to use is not listed on the
Port Forwarding
screen, you can
define and manage your own Servers:
Create a new Server:
1. Click "Clear Form"
2. Enter the required data, as described above.
3. Click
"Add".
4. The new Server will now appear in the list.
Modify (Edit) a Server:
1. Select the desired Server from the list
2. Make any desired changes (for example, change the
Enable/Disable setting).
3. Click "Update" to save changes to the selected Server.
Delete a Server:
1. Select the entry from the list.
2. Click
"Delete".
Note:
You can only delete Servers you have defined. Pre-
defined Server cannot be deleted.
From the WAN or Internet, ALL Port Forwarding have
the same IP Address - the IP address assigned to the
WAN port.
48
