Allied 4001, Техническое руководство, Страница: 50 / 73

SECTION 10.0 MAINTENANCE
10.1 Daily Maintenance
•
Clean and lubricate end cap threads
with an anti-seize lubricant. Tighten end
cap according to procedure in Section
9.8, Step 9.
•
Clean and oil Hole-Hog.
•
Lubricate Hole-Hog according to
Section 7.0.
10.2 Inspection And Preventive
Maintenance
After every 100 hours of operation, the
Hole-Hog should be disassembled, cleaned
and inspected.
• Check all components for abrasion and
excessive wear. Repair or replace as re-
quired.
• Inspect the body and anvil for cracks or
large chips. Replace if excessively worn.
A smoothly worn body is acceptable.
• Check the exhaust ports in the shock ab-
sorber for obstructions. Clean and check
for damage.
• Check hose for excessive wear or kinks.
Replace a damaged hose.
• Check shock/valve guide for proper seat-
ing. Press into place or replace shock if
necessary.
The frequency of maintenance depends
upon the operating environments and con-
ditions of operation. Refer to 10.3 for addi-
tional maintenance considerations.
When disassembling the Hole-Hog, refer to
8.5 Extent of Disassembly for guidelines in
planning disassembly maintenance.
10-3. Conditional Maintenance
Disassemble, clean and lubricate all
Hole-Hog working surfaces under the fol-
lowing conditions:
•
The Hole-Hog is to be stored for more
than one week.
•
The Hole-Hog is operated in extremely
humid weather conditions.
•
The Hole-Hog is operated in muddy or
extremely wet soils.
•
If reduced performance is observed.
10.4 Warranty Protection
Maintain written records of Hole-Hog
maintenance, service and repair. These re-
cords will be helpful if warranty coverage is
ever in question. Each record shall include
:
• The date of service, maintenance or re-
pair.
• A description of the service, mainte-
nance or repair performed. Include part
numbers if applicable.
• Copies of purchase order(s) and in-
voice(s) for repair parts and service.
• The name and signature of the person
performing the service, maintenance or
repair.
43
A
LLIED 4000 Series Hole-Hog