manualshive.com logo in svg

Allied Telesis AT-S41, Руководство пользователя

Поделиться
Скачать
Allied Telesis AT-S41 Скачать руководство пользователя страница 212

AT-S41 User’s Guide

212

The page indicates which ports in the stack are members of the 
VLAN. A check in a check box indicates that the port is a VLAN 
member. An empty box indicates that the port is not a VLAN 
member.

3. To change the VLAN’s name, enter a new name in the VLAN Name 

text entry field. The name can be from 1 to 32 characters. The name 
can contain spaces, but not special characters, such as asterisks (*) or 
exclamation points (!). This menu item is optional; the management 
software does not require you to provide VLAN names.

4. To add or remove a port, click on the appropriate check box.

Note

You cannot remove ports from the Default VLAN unless they already 
belong to another VLAN. Additionally, port removed from other 
VLANs are returned to the Default VLAN.

Содержание AT-S41













































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды