manualshive.com logo in svg

Allied Telesis AT-S41, Руководство пользователя

Поделиться
Скачать
Allied Telesis AT-S41 Скачать руководство пользователя страница 108

AT-S41 User’s Guide

108

5. Type 

I

 to select Set VLAN ID/Index.

The following prompt is displayed:

Enter VLAN ID ->Enter VLAN ID >

6. Enter a unique VLAN ID for the VLAN. Press Enter.

Since the stack does not examine the VID in tagged headers of tagged 
frames when operating in the Port-based VLAN mode, this VID value 
does not need to be unique from all other VLANs in your network. It 
only needs to be unique from the other VLANs in the stack on which 
you are creating the VLAN. 

The value can be from 2 and 256. 

7. Type 

N

 to select the Set VLAN Name option.

The following prompt is displayed:

Enter VLAN Name ->Enter VLAN Name >

8. Enter a VLAN name of up to 32 characters. Press Enter

The name should reflect the function of the nodes that will be a part 
of the VLAN (for example, Sales or Accounting). The name can contain 
spaces, but not special characters, such as asterisks (*) or exclamation 
points (!).

9. Type 

S

 to Select Port Members.

Enter Stack ID >

10. Enter the number of a switch in the stack which has one or ports that 

are to be members of the VLAN. 

The following prompt is displayed:

Enter port number>

11. Enter the ports on the selected switch that are to be members of the 

new VLAN. Press Return.

You can specify the ports individually (e.g., 2,3,5), as a range (e.g., 7-9), 
or both (e.g., 2,5,7-9).

12. If the VLAN will consist of ports from different switches in the stack, 

repeat Steps 9 to 11 to add ports to the VLAN from other switches.

13. Type 

A

 to select Apply.

You have now created a new VLAN. You gave it a VID and a name. You 
also specified which ports were to be members of the new VLAN. 

Содержание AT-S41













































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды