manualshive.com logo in svg

Allied Telesis AT-S41, Руководство пользователя

Поделиться
Скачать
Allied Telesis AT-S41 Скачать руководство пользователя страница 203

AT-S41 User’s Guide

203

Viewing or Modifying a Tagged or Untagged VLAN

There are two phases to modifying a VLAN. You might need to perform 
both phases or just one, depending on what it is you want to change in 
the VLAN. The phases are:

❑

Phase 1: In this phase, you can view a VLAN’s configuration, as well 
as change a VLAN’s name and add or remove tagged ports. 

❑

Phase 2: In this phase, you can add or remove untagged ports.

Phase 1

This phase explains how to display the Config VLAN Member Menu of a 
VLAN. You can use the page to view a VLAN’s configuration as well as 
change a VLAN’s name and add or remove tagged ports. 

Note

If you do not want to change a VLAN’s name or add or remove 
tagged ports, then skip this procedure and go straight to Phase 2 to 
add or remove untagged ports.

1. Click on the Advanced Config menu tab and select VLAN Config from 

the sub-menu. Select VLAN Info from the next sub-menu.

The VLAN Information will appear, as displayed in Figure 69

Figure 69  

VLAN Information (802.1Q VLANs)

This page lists all of the VLANs that currently exist in the stack.

2. To view a VLAN’s configuration or to make changes to a VLAN, click 

the Modify link in the right column for the VLAN you want to view or 
modify. 

Содержание AT-S41













































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды