manualshive.com logo in svg

Allied Telesis AT-S41, Руководство пользователя

Поделиться
Скачать
Allied Telesis AT-S41 Скачать руководство пользователя страница 211

AT-S41 User’s Guide

211

Viewing or Modifying a Port-based VLAN

To view the configuration of a port-based VLAN or to modify a VLAN, 
such as to add or remove ports or to change the VLAN name, perform 
the following procedure:

1. Click on the Advanced Config menu tab and select VLAN Config from 

the sub-menu. Select VLAN Info

 

from the next sub-menu.

The VLAN Information page will appear, as displayed in Figure 73

Figure 73  

VLAN Information (Port-based)

This page lists the port-based VLANs in the stack.

2. Click the Modify link in the right column for the VLAN you want to 

view or modify. 

The Create/Modify VLAN page will appear, as displayed in Figure 
74.

Figure 74  

Create/Modify VLAN (Port-based VLANs)

Содержание AT-S41













































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды