manualshive.com logo in svg

Allied Telesis AT-GS950/48, Руководство пользователя, Страница: 351 / 410

Поделиться
Скачать
Allied Telesis AT-GS950/48 Скачать руководство пользователя страница 351

351

Chapter 26

Cable Diagnostics

This chapter provides procedures to run cable diagnostics on the cables 
connected to the switch ports. If a port is selected, a cable must be 
connected to it for meaningful test results to be displayed.

Note

To permanently save your new settings or any changes to the 
configuration file, select 

Save Settings to Flash

 from the main 

menu on the left side of the page.

To run these cable diagnostics, perform the following procedure:

1. From the main menu on the left side of the page, click the 

Tools 

folder.

The 

Tools 

folder expands.

2. From the 

Tools 

folder, select 

Cable Diagnostics

.

The Cable Diagnostics page is displayed. See Figure 142.

Figure 142. Cable Diagnostics Page

3. Select the 

Port 

number from the pull-down menu.

4. Click 

Test Now

.

5. The following information is displayed:

Содержание AT-GS950/48



























































































































































































































































































































































































































Отзывы:

Нет отзывов