manualshive.com logo in svg

Allied Telesis AT-GS950/48, Руководство пользователя, Страница: 161 / 410

Поделиться
Скачать
Allied Telesis AT-GS950/48 Скачать руководство пользователя страница 161

AT-GS950/48 Web Interface User Guide

161

A tagged VLAN consists of the following:

“VLAN Index”

“VLAN Name”

“Tagged and Untagged Ports”

“Port VLAN Identifier (PVID)” on page 162

“General Rules for Creating a Tagged VLAN” on page 162

VLAN Index

You must assign a unique number to each tagged VLAN in a network. This 
number is called the tagged VLAN ID. This number uniquely identifies a 
tagged VLAN in the AT-GS950/48 switch and across the network.

VLAN Name

To create a tagged VLAN, you must give it a unique name. This name can 
reflect the function of the network devices that are VLAN members, such 
as Sales, Production, and Engineering.

Tagged and Untagged Ports

When you specify that a port is a member of a tagged VLAN, you need to 
specify that it is tagged or untagged. By definition, the port is a static 
member of a tagged VLAN when it is configured as either a tagged or 
untagged port. You can have a combination of tagged and untagged ports 
in the same VLAN.

Note

A port can also be dynamically assigned to a tagged VLAN within a 
voice VLAN configuration which is a special configuration of a 
tagged VLAN. For more information concerning static and dynamic 
membership in a tagged VLAN, see “Overview” on page 274 in the 
“Voice VLAN” chapter.

Packet transmission from a tagged port differs from packet transmission 
from an untagged port. When a packet is transmitted from a tagged port, 
the tagged information within the packet is maintained when it is 
transmitted to the next network device. If the packet is transmitted from an 
untagged port, the VLAN tag information is removed from the packet 
before it is transmitted to the next network device.

The IEEE 802.1Q standard describes how tagging information within a 
packet is used to forward or discard traffic throughout the switch. If the 
incoming packet has a VLAN tag that matches one of the Group IDs of 
which the port is a member, the packet is accepted and forwarded to the 
appropriate port(s) within that VLAN. If the incoming packet’s VLAN tag 

Содержание AT-GS950/48



























































































































































































































































































































































































































Отзывы:

Нет отзывов