Allied Telesis AT-GS950/48, Руководство пользователя, Страница: 247 / 410

AT-GS950/48 Web Interface User Guide
247
4. Enter a number in the Policy Index field.
The Policy Index must be a unique number within the range of
1 - 65535 which identifies the policy. This field is mandatory.
5. Enter a number in the Policy Sequence field.
The Policy Sequence must be a unique number within the range of
1 - 65535. This field is mandatory.
The Policy Sequence identifies the ranking of the specific policy and
defines when it will be executed relative to the other policies. A policy
with a Policy Sequence number 1 will be executed first, number 2 will
be executed second, until the highest Policy Sequence number is
reached which will be executed last. For the status of the order of the
policies applied to specific ports, refer to “Policy Database” on
page 256.
6. Enter a port or group of ports in the Port List field. The port list can be
specified as a consecutive list, a non-consecutive list, or a combination
of the two. At least one or more ports must be specified. For example,
you can specify ports 1-3,5,8.
Note
You cannot combine members and non-members of a trunk in a port
list. For example, if ports 3 and 4 are configured and active via the
Trunking page, you would not be able to assign 1-4 in the port list,
but you could assign 3 and 4.
Note
Policy Index , Policy Sequence , and Port List are required
parameters when you create a policy.
7. Configure one or more of the remaining parameters, listed below:
IPv4 Source MAC Address - Source MAC address in
xx.xx.xx.xx.xx.xx format. Applies to IPv4 only.
IPv4 Source MAC Mask Length - Length of the Source MAC Mask
ranging from 1 - 48. Applies to IPv4 only.
IPv4 Destination MAC Address - Destination MAC address in
xx.xx.xx.xx.xx.xx format. Applies to IPv4 only.
IPv4 Destination MAC Mask Length - Length of the Destination
MAC Mask ranging from 1 - 48. Applies to IPv4 only.
VLAN ID - A unique number identifying a VLAN ranging from 1 -
4093.