PUTTING THE MACHINE OUT OF SERVICE
To put the machine out of service, follow these instructions:
DISCONNECTING THE MACHINE
1. Switch off the external electric power inlet to the machine.
2. Turn off the main switch on the machine (
3. Close the external water/steam inlet to the machine.
4. Make sure that the external electric power steam inlets are
shut off. Disconnect all electric, water or steam inlets.
5. Insulate the external electric power inlet conductors.
6. Equip the machine with a sign that reads “Out of Service”.
7. Unscrew nuts (bolts) which secure the machine to the floor
(applicable for version without weighing system).
8. During transportation follow the instructions stated in Chap-
Important information before installation
In case the machine will never be used again, secure it so that in-
jury of persons, damage to health, property, and nature is avoid-
ed. Make sure that enclosing of persons or animals inside the ma-
chine cannot occur, and that no one can be injured by movin/
sharp parts of the machine possibly operating fills (e.g. remove
the internal and external door of the drum, secure the internal
drum against turning, etc.)
CAUTION
FALLING DOOR AND GLASS CAN CAUSE INJURIES!
MACHINE DISPOSAL
WARNING
TAKE ALL NECESSARY PRECAUTIONS WHILE DIS-
ASSEMLING THE WASHER TO AVOID INJURIES BY
GLASS OR SHARP METAL EDGES.
C098
POSSIBILITY OF THE MACHINE DIS-
POSAL BY THE SPECIALIZED COMPA-
NY
Information concerning the WEEE-directive (Waste Electrical
and Electronic Equipment; for European Union member states
only):
• For the production of the machine that you have purchased,
natural resources are being reclaimed and used. The machine
may contain substances which are dangerous for health and
the environment.
• When you dispose of your machine, to avoid the spreading of
these substances in our environment, and to reduce the pres-
sure on our natural resources, we encourage you to use the
collection, reuse and recycle system of your region or country.
These systems reuse or recycle most of the components.
• The symbol “crossed out bin on wheels ( )” invites you to
make use of these systems.
• For more information concerning the systems for collection,
reuse or recycling of disposed machines, contact the compe-
tent administration of your region or country (waste manage-
ment).
• You can also contact your distributor or the manufacturer for
more information concerning the environmental performances
of our products.
• Please consider that the WEEE directive is generally only val-
id for household machines. In some countries professional
machines are added, in others not. Therefore the symbol ( )
may not be present.
• For distributors: Due to the diversity of the national legisla-
tions, the manufacturer cannot take all the measures to be in
accordance with all national legislations of each member
state. We expect that each distributor who imports our appli-
ances into a member state (and puts them on the market) takes
the necessary steps to be in rule with the national legislation
(as the directive requires).
POSSIBILITY OF THE MACHINE DIS-
POSAL BY OWN POTENTIAL
It is necessary to sort out the parts for metal, non-metal, glass,
plastics etc, and recycle them. The sorted out materials must be
classified into different waste groups.
Offer the sorted waste to the company which is competent for
further treatment.
PUTTING THE MACHINE OUT OF SERVICE
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
62
Part No. D1612ENR3
