Alliance Laundry Systems LMA260_MICRO, Оригинальное руководство пользователя

Страница: 50 / 62

posed conductive parts, which can be touched simultaneously,
make sure to make equipotential bonding between all these appli-
ances. The external protective terminal for this purpose is located
on the right part of the washing machine frame refer to (
Figure
23 ). The minimum protection conductor’s cross section depends
on the supply cable cross section and can be found in Table 6 .
However, for the protection purposes with the supply cable sec-
tion of min. 4 mm² we recommend to select a larger conductor
section, i.e. 6 mm².
WASHER PROTECTIVE EARTH CONNECTION
1. Washing machine (right side of the machine)
2. Laundry protective connection
3. Washing machine external protective terminal
4. Protective conductor - washing machine connection
5. Earthing mark
Figure 23
CONNECTION OF LIQUID WASHING SOAP SUPPLY
By default the machines are produces in version: With liquid
soap
General: Always use liquid soap pumps that have a flow rate
high enough to bring the requested quantity into the washer in
less than 30 sec.
Important: Start pumping immediately after the water valves are
open. The incoming water dilutes the liquid soap and brings it in-
to the tub assembly.
CAUTION
Secure the location of the wiring and hoses in such a
way that they can not be pinched, damaged or rub-
bed. Only authorized workers, with a valid qualifica-
tion, should do the installation. Before you start to
use liquid soap, check with your liquid soap supplier
whether the liquid soap is harmless and inert to HD-
PE and PVC material in order to avoid a problem that
manufacturer is not responsible for.
The washer has provisions for connecting external dosing of liq-
uid soaps. On the upper stand a plastic hose connection part is
present,
Figure 24 to connect the liquid soap hoses. Depending of
the number of liquid soap pumps that will be used, drill holes
(max. 5) of Ø 8 mm / 0.315" in the plastic hose connection part
for each pump. On the plastic hose connection part is also a nip-
ple of Ø 12 mm / ½". Use this nipple ONLY for entering diluted
soap. Drill with Ø 11.5 mm / 0.45". By default, these nipples are
closed. Drill only the ones that will be used.
Take care that the
drill particles are carefully removed so that they can not clog
up the hoses and openings.
Plastic hose connection part
Figure 24
INSTALLATION
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
50 Part No. D1612ENR3