Alliance Laundry Systems LMA260_MICRO Скачать руководство пользователя | Manualshive

Страница: 24 / 62

background image

SYMBOLS ON THE MACHINE

See User's manual

IMPORTANT INFORMATION BEFORE

INSTALLATION

FOR TRANSPORTATION AND STORAGE

IN CASE OF TRANSPORTATION AND STORAGE,
WATCH COMPONENTS PROTRUDING FROM THE
CONTOUR LINE OF MACHINE (DOOR LOCKS ETC.),
TO AVOID INJURIES.

• Never push, pull or exert pressure on components protruding

from the machine contour line (controls, door locks etc.).

• Make sure that these components are secured so as to avoid

damages during machine manipulation and installation.

• In case of the machine transportation by the customer, follow

the manufacturer's instructions for transportation, handling
and storage of the product. In case of transportation of ma-
chine by the customer the manufacturer is not responsible for
possible damage of machine in the course of transportation. In
case of storage the machine in a free area it must be protected
against mechanical damage and weather condition factors.

FOR INSTALLATION

ALL CONNECTIONS AND GROUNDING MUST BE PER-
FORMED BY QUALIFIED PERSONNEL WITH PROPER
AUTHORIZATION (ACCORDING THE INSTALLATION
MANUAL IN COMPLIANCE WITH LOCAL STAND-
ARDS).

• The washer must not be installed or stored in an area where it

will be exposed to water and/or weather. Avoid damp condi-
tions where water or moisture could run down the walls and
covers of the washer or cover the floor around the washer. Do
not install the washer above an open gutter. Close any nearby
gutters so that waste water steam cannot collect near/inside
the washer.

• Any changes in the machine installations must be approved

by the distributor manufacturer. The dealer / manufacturer is
not otherwise responsible for possible injuries or damages. In-
terference and changes in the machine construction are not al-
lowed and the manufacturer refuses any responsibilities in
such cases.

• Define dangerous areas in the laundry room and do not allow

people to enter if the machine is in operation.

MACHINE INFORMATION

• This manual comprises information for the soft - mount ma-

chine series with a load of dry linen 26 / 57 / 265, 33 / 73 /
332, 44 / 97 / 442, 66 / 146 / 663 [kg / lb / L]. Verify the ma-
chine model according to your order and the serial plate locat-
ed on the left upper side panel on the front side of the washing

machine, (load side view),

and find corre-

sponding information in the manual.

• The machine is controlled by an electronic control. Find the

programming instructions in the programming manual.

• Additional heating can be provided by electrical heating ele-

ments or by steam from an external steam supply.

• Water inlets can use warm, cold soft and possibly also cold

hard water. A machine can be equipped with recycled dis-
charging and dosing pumps for liquid soaps upon the order.

• Electrical setup of the machine is indicated on serial plate,

(see serial plate,

,

).

IMPORTANT SAFETY INSTRUCTIONS

©

Copyright, Alliance Laundry Systems LLC -

DO NOT COPY or TRANSMIT

24

Part No. D1612ENR3

«
...
22
23
24
25
26
...
»

Содержание LMA260_MICRO































































Отзывы:

Нет отзывов

Похожие инструкции для LMA260_MICRO

Бренд: Jet-tech Страницы: 33

Бренд: Hoover Страницы: 144

Бренд: Rac Страницы: 11

Бренд: MAKINEX Страницы: 41

AdoraDish V2000

Бренд: V-ZUG Страницы: 52

Бренд: BALAY Страницы: 24

Бренд: Jenn-Air Страницы: 76

Бренд: Parmco Страницы: 36

Бренд: Hamach Страницы: 55

Бренд: Mach Страницы: 41

Бренд: Alliance Laundry Systems Страницы: 60

Бренд: Hammerhead Страницы: 2

Бренд: Dawlance Страницы: 4

Бренд: Alliance Laundry Systems Страницы: 19

Бренд: Daewoo Страницы: 31

Бренд: Waspper Страницы: 13

Millennia EDW24

Бренд: Dacor Страницы: 28

Бренд: Kärcher Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды