Alienware MJ-12 m7700a, Руководство пользователя

Страница: 126 / 162

Modules
7 - 26 RAID Setup
7
16. If you have chosen the Auto Setup For Performance option you will be
asked to press Y to confirm the array creation.
If you have chosen an option from the
Array Mode RAID... menu, select
Start Create Process, and press Enter and Y to create the array (make
sure you have selected the disk drives).
17. The Create New Raid Success!! message will appear on screen.
18. Press ESC twice, and then press Y to exit the utility.
19. Insert the Microsoft Windows OS CD into the CD/DVD drive, and connect
the external USB floppy disk drive to the notebook computer
20. Press a key when you see the message " Press any key to start up from
the CD/Press any key to boot from CD ".
21. Press the F6 key when you see the message “ Press F6 if you need to
install third party SCSI or RAID driver ”.
22. When the Windows Setup menu appears, press the < S > key to " Specify
Additional Device ".
23. Insert the RAID Driver Diskette into the external USB Floppy drive.
24. Press Enter to select the controller for your Windows XP operating system
(see below).
25. The system will now read from the floppy disk drive and then return to the
Windows Setup menu.
Figure 7 - 14
RAID Controller
OS Select
Operating System
Installation
Warning
If you are installing an
operating system (e.g.
Windows XP ), and
have a 10-in-1 Card
Reader present, make
sure to set the
Card
Reader option in the
BIOS to “ Disabled ”.
VIA VT8237/6421/6410 SATA RAID Controller (Windows XP/SRV2003)