Alemite Carbon Shield, Инструкция по установке, эксплуатации и обслуживанию

Страница: 37 / 58

alemite Carbon Shield Service Guide | 35
www.alemitecarbonshield.com
To help keep your Carbon Shield
™
system
operating at peak efficiency, create a periodic
maintenance schedule covering all major
components. Keep logs that detail the date and
extent of your maintenance tasks. Units equipped
with a communications module can capture data
for logs electronically.
Weekly
o
Inspect for air and oil-mist leakage
o
Clean inside of generator console and correct
any leaks.
o
Conduct manual test of mist head’s pressure
relief valve
o
Check regulated air pressure and the supply air
pressure
Every Month
o
Check oil collection bottles/containers. Dispose
of oil as needed
Every Year
o
Replace oil inlet filter
o
Inspect hardware; make sure all connection are
tight
o
Inspect all gasket connections
o
Drain and clean oil tank & oil pick up screen
filter Elements
Oil Inlet
The oil filter element can be changed while the
console is operating.
Important Note: Always close the ball valve in the
Carbon Shield™ cabinet and the air supply valve to
the refill pump before changing the filter element.
Follow the proper lockout/tagout procedures.
Air Filter/Regulator
The filter/regulator element should be changed
whenever the oil reservoir is cleaned.
Manually Filling Oil Reservoir
Should you need to fill the reservoir on your
Carbon Shield
™
system manually, follow these steps
1. Avoid overfilling: DO NOT fill the oil reservoir past
the full mark. Without proper air space within
the reservoir, the system will not function properly.
Loader
With the loader fitting on the mist head, you can
add oil to the reservoir with a manual bucket pump.
CLEAN THE LOADER FITTING bEFORE FILLING.
MAintEnAncE cHEckList
NEW MAINTENANCE CHECKLIST TO COME