Alan MAP600, Руководство пользователя

Страница: 39 / 46

MAP 600 – User’s Manual
Page 39
13. Saving Tracks
When you are traveling using waypoints as reference indicators, you leave a track. Tracks consist of a series of positions
relative to the actual route traveled, which are registered at regular intervals (of time and space) during your trip by your
MAP 600. This track can be used again when you are traveling along the same route, or to verify that you have correctly
followed a previously programmed route. MAP 600 can store up to 2500 positions per track (8 tracks in its memory, and
one for current use).
Data points are generated only when the device is moving. Each track is displayed with its creation date.
13.1 Activating a track
1. From any page , press the button twice, or
press once, highlight Main Menu using the Joystick and press the button (Diagram 1)
1
2. Using the Joystick, highlight Track Logs and press the button. The screen shown in Diagram 2 will appear.
2
3. If you wish, use the Joystick and the button to change the recording mode shown under Tracking :
•
Off - excluded
•
Fill – recording of points until the memory space is filled (up to 2500 positions)
•
Wrap – continuous recording of points (when the memory is full, new points will substitute the oldest ones in the
memorization order)
•
Continue – continuous recording of points on the 8 available tracks
4. Moving to the right with the Joystick, you will enter the System Setting menu where you can select the Recording
Type option. It is possible to change the time interval and the distance interval used to save the points that create
your track (Diagram 3).
3
2
The priority over saving will be always given to the first target reached. For example if you set “100m” and “10sec” (as shown in
diagram 3), the point will be saved every 10 seconds if 50 meters are covered in 10 seconds, or every 100 meters if 100 meters
are covered in 5 seconds.
5. Move the Joystick up or down to highlight and press the button to confirm.
2
If you choose Fill at step 3 and the memory space has reached 2500 positions, MAP 600 will prompt you with the message
Tracking Full, save or clear? Press the button. The display will show the screen appearing in step 2. The next paragraph
explains the options available.