30
Optical Fusion Splicer Instruction Manual
Bubbles
1. Bad angle of fiber
end-face
2. Dust on fiber end face
3. Prefuse in lower
current or shorter time
4. Splicing in lower
current or shorter time
1. Re-load or re-clean
fiber
2. Increase Perfuse
current or time.
3. Increase splice
current or time.
Fiber
Separation
1. Low fiber push value
2. Low speed of fiber
push
3. Higher splice current
or longer splice time
1. Execute “Detect
system parameter”
2. Decrease Prefuse
current or time
Thicker
Higher fiber push value
Decrease overlap
value, advise “ARC
Calibration”
Thinner
1. Low fiber push value
2. Higher splice current
1. Increase overlap
value, advise “ARC
Calibration”
2. Decrease splice
current
Line
Lower splice current
Increase splice
current