F
4
SAT-17T Fusion Splicer Instruction Manual
battery and make sure the liquid does not contact with in
skin or eyes. If liquid contact with skin or eyes, please wash
skin or eyes thoroughly and ask for nearest hospital service
immediately. Call our service center for battery replacement
information.
Do not place battery on top of AC adapter during the
charging.
Before using the shoulder belt of carrying case, please check the
belt and hooks condition. Carrying the case with a damaged or
non-functional shoulder belt may break the belt or come off and
result personal injury or equipment damage.
Cautions
Do not store splicer in any area where temperature and humidity
are extremely high, otherwise it may result equipment failure.
Do not touch sleeve directly or heater during heating or
immediately after completion of heating. Their surfaces are very
hot, and any touching may result skin burn.
Do not place the splicer in an unstable or unbalanced position.
The splicer may shift or dropped down, a personal injury or
equipment damage may be resulted.
The splicer is precision adjusted and aligned. Do not let splicer to
receive a strong shock or impact. Unexpected equipment failure
may result. Use supplied carrying case for transportation and
storage. The carrying case protects the splicer from damage,
moisture, vibration and shock during storage and transportation.
In order to extend life cycle of rechargeable battery, please
charge it at least every three months
