26
Optical Fusion Splicer Instruction Manual
Splicer
Parameters
Description
Prefuse Time
Set the Prefuse time between time of ARC
and fiber pushing.
Prefuse ARC
Current
Set the Prefuse ARC current between time of
ARC and fiber pushing.
Splice Time
Set splice ARC time.
ARC Current Set splicer ARC current
Overlap
Set the fiber pushing overlap within splicing
Motor Speed Set motor speed within splicing
ARC2
Set whether on/off additional ARC
ARC2 Time
Set additioanl ARC time
ARC2
Current
Set additioanl ARC current
6.2 Auto-align and End-face Check
To ensure excellent splicing, this fusion splicer is adopted Image
processing System to check the optical fiber. But with some
situation, the system may not find the splicing fault. Thus, in
order to get a better splice result, user need to visually check the
fiber via displayer.
Press
, enter into auto align mode, left and right fiber
forward motion to each other side. The system automatically
checks the optical fiber end face after cleaning ARC, if the end
face is too bad to splice, then an error message will show on
screen, otherwise the fiber will go on aligning. After well
