23
Optical Fusion Splicer Instruction Manual
end of each fiber is located between the v-groove edge and tip
of electrode. If fiber coating has any curl, place optical fiber
and make its curve is turned upwards. Be careful to avoid the
prepared optical fiber ends touched any objects, so that optical
fibers end -surface quality can be guaranteed.
c.
Hold fiber with fingers and close fiber clamp tip cover to let
optical fiber in a fixed position of v-groove. Make sure fibers
are placed in the bottom of the v-grooves. If fiber is not placed
properly, please reload fiber.
d.
Compliance with step b/c, load the another side optical fiber.
e
. Close the wind protector, start splicing.
Note:
Before splicing, the protection sleeve should be placed
on a random optical fiber.
