41
Optical Fusion Splicer Instruction Manual
user can upgrade the system to newest program via this operation.
Operation step as following:
a.
In “System Setting” menu, find “About” and enter the info.
review page, user can find the current version info. (such as:
V5.01/V2.28/ROM: V0.80)
b.
Get the newest updated software from manufacturer, and
compare whether it is the same with the current version, if yes,
then user can ignore this operation.
c.
Power on the fusion splicer, use USB wire to connect the fusion
splicer and PC, after the computer pop up the U disk prompt,
copy the updated software to the U disk. After the software is
totally copied, shutdown the fusion splicer and restart it.
d. When restart the fusion splicer, user should follow the prompt
message. In general, the progress bar will change 0%--100%,
if abnormally terminate, please repeat step b, c, d. And if there
is some problems user can’t solve, contact with manufacturer
directly.
