Airoptic GasEye, Руководство пользователя

Страница: 158 / 254

WebServer application
158 GasEye Cross Duct SG and MG
Operating instructions, 05/2021
Parameter groups
There are four main groups visible on the left panel:

MP1

IO

NETWORK

SYSTEM
8.4.1.1. MP1 -> Process (Process environment configuration)
Process parameters
Name Description
PROCESS.TEMP_IS
Select temperature sensor source.
(Table)
PROCESS.TEMP_USER_VALUE Temperature value in manual mode
PROCESS.PRESS_IS Select pressure sensor source (Table)
PROCESS.PRESS_SENSOR_TYPE Select sensor pressure type (Table)
PROCESS.PRESS_USER_VALUE Pressure value in manual mode
MEAS.PATH_LENGTH_CH_1 Length between transmitter and receiver
MEAS.PATH_LENGTH_CH_2 Length between transmitter and receiver
MEAS.RESPONSE_TIME_T90 Time response for infinite impulse filter
Temperature sensor source
Name Description
Value is set manually by user from
WebServer interface.
Temperature sensor is connect to analog
input socket
Resistance temperature sensor
Temperature is send by industry protocol
Only applicable in oxygen analyzers on
special request