Version May 2021
28
EN
agru SP 63 mobile
V 3
User’s Manual
agru Kunststofftechnik GmbH
Ing.-Pesendorfer-Str. 31
4540 Bad Hall, Austria
Display 20
Display 21
Info
A label tag printed from the report review is identified as a copy
by the abbreviation “CPY.” Only labels printed right after the
welding operation (see Sect. 4.7.8) are printed with an incre-
mented number that identifies them as “originals” — if this term
may be used. The number of tags that should then be printed
is defined in the configuration menu (see Sect. 4.2).
Printing label tags is possible only when the tag printer is connected to the
USB A port of the machine. If this is not the case, an error is displayed.
The printer can still be connected when the error message is showing;
the machine recognizes this, the error disappears from the screen, and
the printing process starts.
5.3 Using the Extended Report Viewer
If the “New Report View” option is enabled in the configuration menu,
selecting the “Report View” option of the menu (see Sect. 4.2) will first
display an access code input screen and, after the correct code was
entered, a report view with more powerful func-
tionalities. If the entered code is incorrect, the
“leaner” report view described in Sect. 5.2 will
be displayed.
This extended report view (see Display 20) is very
similar to the standard view, in its initial screen
even presents less data from a report selected in
the list of reports, but features the view filters by
“Commission” and by “Welder” in the upper por-
tion of the screen and aditional function buttons
in the navigation bar. The process of selecting a
given welding report in the list on the left and of
printing a copy of the label tag for that welded joint by touching the
button are the same as in the standard report view (see Sect. 5.2).
In the report view settings, which can be defined after touching the
button, the view filters can be set, thus restricting the list to the reports of
a certain project/commission and/or welder. In the settings (Display 21),
the “Search by Commission Number” and/or “Search by Welder” can be
enabled as a filter.
If the button next to “Search by Welder” is green, i. e., the functionality
is enabled, the cursor keys at “Welder” call the previous or next welding
report written by another welder. Analogously, if “Search by Commission”
is green/on, the previous or next report not be-
longing to the same project will be shown in the
Commission field. This allows selecting a certain
project/commission and/or a certain welder, and
when the
button is touched, the machine
returns to the previous screen and displays in the
list only the reports that belong to the selected
commission and/or the reports that were saved
by the selected welder. If the respective filter is
not enabled in the upper part of the screen the
cursor keys at the criterion in the lower part of the
screen will not allow “filtered” browsing through
the reports.
To disable a previously enabled filter of the list of reports, open the set-
tings too. By touching it, switch the button next to the filter the list should
no longer have from green to gray (disabled). Then the list of reports
