Version May 2021
EN
7
agru SP 63 mobile
V 3
User’s Manual
agru Kunststofftechnik GmbH
Ing.-Pesendorfer-Str. 31
4540 Bad Hall, Austria
damage.
If the machine is operated through a power supply
without a grounding conductor, this will void any and all
warranty under which the product may be.
Important
Power Only to Operational Machine
Power must never be applied to the machine before it is com-
pletely installed and ready for operation.
Info
User’s Manual
The User’s Manual has to be available at any time on the site
where the machine is used. If the User’s Manual should come
to be incomplete or illegible replace it without delay. Feel free
to contact us for assistance.
2.4 User/Operator Obligations
• The machine may be operated exclusively by persons who are fa
-
miliar with the applicable rules, the guidelines for the prevention of
accidents, and the User’s Manual.
• The machine may be operated only when observed. Only persons
who were properly trained by agru or another, authorized organi-
zation and whose training was acknowledged by the appropriate
certificates are allowed to operate and observe the machine. Other
persons must neither operate nor observe it.
• The operating/owning organization engages to check at reasonable
intervals if the machine is operated by the users with the intended
use and under proper guidelines of safe work.
• The machine must never be operated if not in proper state of repair.
Before welding, the user is required to make sure that the state of
the machine is in order.
• The user has to make sure that only one person is present in the
zone where the machine is operating.
2.5 Worksite Description
• The conditions have to fully ensure that the machine cannot slide.
As well the segments of the base plate as the mechanical structure
and the base plate have to be securely connected to each other
before any components are clamped fast. In case of (overhead)
welding operations using the mechanical structure without the base
plate, the welding mechanics has to be securely fastened at the
components to be jointed with the supplied belts.
Important
For an overhead operation, the full weight of the mechanical
structure has to be carried by the belts.
“Hanging” it from
the components to be jointed
, so the clamps would carry its
weight,
is prohibited
.
• Worksite access limitations have to be provided. Appropriate equip
-
ment to achieve this can be requested from a service point or the
selling entity.
2.6 Warranty
Warranty claims may be raised only if the conditions for warranty given
in the General Terms and Conditions of Sale and Shipment obtain. One
precondition is that proper maintenance according to the required sched-
ule (see Sect. 6.3) is ensured.
Info
The term of warranty under which the welding machine is
shipped is 12 months:-
— from the date of purchase, if the machine is bought as a new
—
machine;
