Version May 2021
EN
11
agru SP 63 mobile
V 3
User’s Manual
agru Kunststofftechnik GmbH
Ing.-Pesendorfer-Str. 31
4540 Bad Hall, Austria
• The facing tool is inserted between the carriages, into its position
for clamping the components in the machine, and the clamps them-
selves are adjusted to the spacer pins of the facing tool.
• The components are clamped and the facing distance is adjusted.
• The facing tool is moved to its position for facing.
• Pipe ends are worked using the pipe facing tool until a continuous
blade of shaving material forms.
• Pipe alignment is checked and confirmed by the welder.
• Insertion of the heating element; when inserting it, the heating ele
-
ment has to be clean.
• After the heating element was inserted, closing in the movable car
-
riage is confirmed, and the pipes close in at the predefined force.
• When the carriages close in, they also align the heating element
exactly in-between the pipe butts.
• The pipe butts are then heated to the predefined temperature.
• When the heating phase is over, the pipes are moved apart auto
-
matically to allow for manually removing the heating element.
• Once the heating element removal is confirmed, the pipes close in
on each other again.
• This is followed by a steady force increase until the fusion force is
reached.
• The pipe then cools down at the predefined force.
• After the cooling time is over, the force is automatically removed
from the carriages and the pipe or fitting can be taken out of it.
4 Operation
Before putting the machine into operation, review the transport locks and
safety auxiliaries as well as the way the machine is set into its transport
box. Whenever the machine is moved or shipped, it has to be set into
this box and all locks and auxiliaries have to be engaged. The figures
below help with understanding the transport helpers.
Important
Whenever transported, the roll of labels in the printer has to
be removed and the batteries, placed into the cardboard box.
Mechanics and
Electronics on Base
Plate
Tabletop Plate with
Heating Element in it
Guard
Case with
Reducer
Inserts
Cardboard Box for
Facing
Tool
Batteries
Box for
Extension Cord,
User's Manual
and Other
Accessories
Facing T
ool
Label T
ag
Printer
Charger for Fac
-
ing T
ool
Battery
