Agromehanika AGT 850, Инструкция по эксплуатации

Страница: 42 / 90

INSTRUCTIONS FOR USE
AGT 850 / 860
35
Setting rear-view mirror:

Setting mirror for certain angle
Mirror bar enables turning around the axle. You can turn
it completely in or out in case of tight area. With each
desired move, you must unscrew bolt (1) on the joining
point of bar and holder first.

Vertical setting
As the mirror is fixed in the centre point of the holder,
you can set the mirror also vertically (movement option
up or down).
To set the mirror, first remove both plates (2), unscrew the
bolt on the holder and then rotate the mirror on the bar (3)
left or right, until you set the desired position.
After setting, screw the bolt back and fix the plates.
4.2.3 SAFETY BELT
This is a two-point safety belt, as it is fixed in two points of the
seat and holds the tractor driver over his waist.
At first, the safety belt is in setting position, which means that
it must be set to correct length before first use, according to
user's body.
Fasten the safety belt by inserting the head (fixing element) (1)
in the buckle (2). Undo the safety belt by pressing the red
button (3) on the buckle.
4.2.4 PROTECTIVE COVER OF CARDAN DRIVE
Protective cover of cardan drive (1) prevents the
operator to come into contact with rotating
connection shaft (2).
Protective cover is manufactured in accordance with
Directive 86/297/EEC.
WARNING: When driving the tractor, always use safety belt, unless the roll
bar is lowered!
1
3
2
2
3
1
1
2