Agromehanika AGT 850, Инструкция по эксплуатации

Страница: 58 / 90

INSTRUCTIONS FOR USE
AGT 850 / 860
51
2. Handbrake
Handbrake functions through lever completely independent of work brakes. It is intended mostly for
blocking the wheels, when the tractor is stopped, when idling or when the tractor is completely stopped.
3. Clutch pedal
Clutch pedal controls the clutch when taking off and shifting. Clutch control is performed with pedal on
the left side of the driver's seat. When the seat is turned around, clutch control function is performed by
foot pedal 3.1.
When using the tractor, be careful of correct clutch pedal travel! (see chapter "SETTING CLUTCH
PEDAL").
4. Throttle pedal
By using the throttle pedal, you change the number of revolutions of the tractor. If the seat is reversed,
throttle control function is performed by throttle pedal 4.1.
5. Throttle lever
By moving the throttle lever (up and down) you can set the number of engine revolutions. When the
throttle lever is fixed, it enables the driver to keep constant engine revolutions on
the tractor.
Under the lever is a level scale, which shows the driver approximate value of
load on the tractor engine. Greater area on the scale is the throttle lever, the
greater the engine revolutions, the more it is under load and vice versa.
If the throttle lever is set on one point, with constant number of revolutions and you
increase number of revolutions with throttle pedal, the number of revolutions
increases until you keep the pedal depressed. When you step off the pedal, number of engine revolutions
drops back to starting position, set by throttle lever.
6. Lever for setting steering wheel tilt
Lever enables setting tilt of the steering wheel to adjust it as best as possible to driver's ergonomics.
7. Lever for changing speed groups (reducer)

Position "rabbit" activates fast transmission level

Position "turtle" activates intermediate transmission level

Position "snail" activates slow transmission level
8. Driving direction lever
Lever enables changing driving direction to forward or reverse.

Position "arrow forward" means that the tractor is moving in
the direction of driving

Position "arrow backward" means that the tractor is moving in
reverse
9. Gearshift lever
Numbers (1 to 4) mark transmission levels in the gearbox or tractor speeds.
This means that driving with lever in level 1 is the slowest and in level 4 the
fastest.