Agromehanika AGT 850, Инструкция по эксплуатации

Страница: 21 / 90

INSTRUCTIONS FOR USE
AGT 850 / 860
14

Driving the tractor, loaded with a very heavy towed implement, must be done in reverse on very
steep slopes. Otherwise, the front end of the tractor can lift due to overload and can cause the
tractor to roll over.

Do not drive the tractor transversally on slopes, as you risk rolling it over. If possible, drive only
uphill and downhill.

When braking with towed implement, especially
when driving downhill, consider its length, width
and weight, as these are key for stability and their
factor can greatly extend braking path in
correlation to tractor speed.
2.9 USING IMPLEMENTS

Connect implements only to designated points on the tractor. Do not connect implements, which
do not meet all safety conditions of use when:

Lacking proper signalling;

Lacking suitable safety devices;

Tractor capability does not meet implements.

If you are using the tractor with fixed implement in connection with cardan shaft, always:

Leave the tractor running in idle or shift to neutral gear position;

Activate handbrake;

Place wedges under tractor wheels.

Do not overload the tractor with implement. If there is great load, ensure proper stability of the
tractor by adding appropriate weights.

Keep in mind that the weight changes with implement, which decreases braking effect, which has
an substantial influence on longer braking path.

Do not connect electricity or hydraulics, when the tractor is operating.
WARNING: When working on a steep slope, make certain of ground
firmness, especially in bad weather conditions.
WARNING: If there are additional implements installed on the tractor,
which change weight distribution, adapt you driving to current conditions!