Agromehanika AGT 850, Инструкция по эксплуатации

Страница: 26 / 90

INSTRUCTIONS FOR USE
AGT 850 / 860
19

Never try to disassemble hydraulic tubes or other hydraulic lines, when they are under pressure.
Before using the hydraulic system, make sure that the connection is safe.

When determining hydraulic circuit leakage position, use cardboard for help. If you are dealing
with high pressure circuit, protect your arms and body.

In case of injury, seek medical attention. Due to danger of serious injury, any penetration of liquid
through the skin must be stopped and the liquid must be removed in a matter of hours.
2.12.2 BODYWORK
Do not heat painted parts of the tractor, as this creates toxic gases,
which are harmful to health. When repairing painted parts of the
tractor with welding, soldering or heating, remove the paint first
with sanding!
2.12.3 WHEELS
Regularly check that wheel nuts are tightened properly. When
tightening, use correct torque. Table with torque values for tightening is provided in the instructions for
use in the chapter Maintenance.
When repairing rim due to damage, always remove the tyre beforehand. If you do not have suitable
equipment, leave this task to qualified person.
2.12.4 COOLING SYSTEM
Before inspection, shut down the engine and wait for it to cool down.
When the engine is warm, cooling liquid in the tank is under pressure
and can cause burns, if you open the cover.
WARNING: Never repair rims with tyres still on, because tyres can explode
with compressed air!
WARNING: Always refill cooling liquid when the engine is cold!