INSTRUCTIONS FOR USE
AGT 850 / 860
18
2.12
MAINTENANCE
In the period of tractor operation, maintain it regularly, as foreseen by the manufacturer. Correct
maintenance ensure long operating period of the tractor and suitable safety.
Before starting maintenance work on the tractor, shut down the engine, remove the key and engage the
handbrake and wait for the tractor to cool down:
Inform yourself on servicing or leave to adequately qualified
personnel.
Keep the work place clean and dry.
Do not lubricate, repair or set the tractor when in motion! Do not
touch moving parts! Shut off power and make sure there is no
work pressure in the hydraulic circuit!
Maintenance and servicing should be performed when the tractor
is cleaned.
During maintenance and servicing of the tractor, disconnect all
implements.
Use only suitable tools for servicing.
Disconnect tractor's drive shaft (PTO) to prevent sudden turning on
and operation of the machine.
Do not check the tractor without "engaging" safety elements.
Support the tractor for repair or maintenance, so there is no
uncontrolled movement.
Support and install safely all parts, which need to be raised during
service.
Maintain machine parts in good condition. Remedy problems immediately. Replace worn out and
damaged parts. Remove excess oil, grease or any other filth.
During tractor repair, use protective equipment.
2.12.1
HYDRAULIC SYSTEM
Check the condition of hydraulic system (joints, tubes), especially tubes
going to hydraulic cylinders of steering system.
Do not use open flame near tubes under high pressure. Damage
to any tube under high pressure can cause flammable liquids
(fuel, oil) to escape and thus causing severe burns.
Liquids, coming out of the tubes, can be under high pressure and
can damage skin and, if they get under the skin, can cause
serious injury.
WARNING: Do not perform maintenance work on the tractor, when it is
operating. Stop the tractor under safe conditions!
PROHIBITED REPAIR
DURING OPERATION!
Содержание AGT 850
Страница 2: ......
Страница 46: ...INSTRUCTIONS FOR USE AGT 850 860 39 HYDRAULIC SCHEME...
Страница 75: ...INSTRUCTIONS FOR USE AGT 850 860 68 HYDRAULIC SCHEME...