Agromehanika AGT 850, Инструкция по эксплуатации

Страница: 41 / 90

INSTRUCTIONS FOR USE
AGT 850 / 860
34
4.2.2 ROLL BAR
The tractor is, as standard, equipped with two roll bars, which, together, form suitably safe protection for
the driver in case of any accident or tractor roll-over.
Figure shows main components of tractor with roll bar.

A) Front roll bar (ROPS)
Front roll bar is constructed so that it can be moved to
horizontal position.
Do this only when work requires it, on flat ground, with
no danger of rolling over and on a short distance.
In case of lowered roll bar, the driver must not fasten his
seat belt. Therefore, he must be very careful when
driving, because there is no protection with any safety
element again possible roll-over. The driver or user must
not, in any case, drive the tractor with lowered roll bar
on roads intended for public road traffic.

B) Rear roll bar (ROPS)

C) Single rear-view mirror
Set rear-view mirror accordingly for safe control of the tractor and implement during driving.
Rear-view mirrors are set correctly, when the driver see the rear of the tractor and implement without
trouble.
IMPORTANT: Roll bars (ROPS) have been tested according to standard
O.E.C.D. and offer suitable protection for the driver or user in case of roll-
over.
WARNING: When the roll bar is lowered, the driver MUST NOT use the
safety belt!
WARNING: The tractor is not to be used:
- if the roll bar is not installed properly;
- if the roll bar is damaged;
- if modifications have been made to the roll bar.
In this case, replace the roll bar with a new one!
A
C
B