Agromehanika AGT 850, Инструкция по эксплуатации

Страница: 23 / 90

INSTRUCTIONS FOR USE
AGT 850 / 860
16

Always make sure that safety elements are in place and cover all rotating parts, including
"crosses" of the cardan shaft on both ends! Do not use cardan without protection!

Do not touch rotating cardan shafts! Safety distance from rotating cardan shaft is 1.5 m.

To ensure long life expectancy of the cardan, avoid using angles greater than 15° when working.

Protect safety elements from rotating with chain!

Make sure that cardan shaft protections on the tractor and implement are joined (fastened)!
2.10 USING THE TRACTOR ON THE ROAD
Do not drive the tractor on public roads, but if you do, observe the following instructions:

When driving with the tractor, heed to road traffic regulations;

Before driving, make sure that the brake pedals are connected;

If you want to use the tractor in road traffic, it must be fitted with road signalling and signs, as
defined by road traffic regulations;

Check that the light signalling on the tractor and implement (if in use) works flawlessly;

Check condition of tyres (pressure and wear);

Do not use differential lock when taking off or driving on the road;

Lift mechanism must be fixed in top position during driving;

If you drive the tractor with an implement, reduce speed to take into account that braking paths
(depending on weight) significantly increases and do not brake or turn suddenly;

When driving the tractor on the road, the seat must always be in normal position, never reverse;

During driving, always adapt to traffic and conditions on the road;

If you are driving in road traffic, do not engage the cardan shaft – do to this only when working;
WARNING: Install the cardan shaft according to order implement

tractor. Never connect the other way around, as this may cause serious injury
or even death!