Agromehanika AGT 850, Инструкция по эксплуатации

Страница: 68 / 90

INSTRUCTIONS FOR USE
AGT 850 / 860
61
4.6.7 ROTATION LIGHT
As option, tractor can be fitted with a rotation light (only
with an installed cabin). On tractor with cabin, fitted with
front lift mechanism, rotation light is fitted as standard.
4.6.8 FLOATING HYDRAULICS WITH SUPPORT
The tractor can, as additional equipment, also be fitted with floating hydraulics or system for loading the
tractor on surface and unburdening the weight of the implement on surface.
To engage floating hydraulics, lever of bottom valve (B) must be in position 2. If required during work,
use control lever (A) for operation of control valve for lift of hydraulics to unburden (control lever in
position 2) or load (control lever in position 1) rear axle of the tractor (see chapter "CONTROL OF
REAR HYDRAULIC LIFT MECHANISM").
Charge the hydraulic battery with position for lift of control lever (position 1) for operation of control
valve, as well as with own weight of implement when lowering.
Maximum allowable pressure is 180 bar.
Discharge the hydraulic battery by moving the lever of lower valve (B) in position 2, then move control
lever (A) in position 2 (lowering) and hold it, until the pressure gauge shows no pressure.
When you are not using the system, shut it down. Lever on the lower valve (B) must be in position 1, and
there must be no pressure in the system!
For faster lift of hydraulics, you can move the lever of lower valve (B) to position 1.
IMPORTANT: If pressure changes for

10 bar, force on the fixing axle of
implement changes for

750N (75 kg).
WARNING: Before interfering with the hydraulic system
(connection/disconnection of implements), lever (B) must be in position 1, and
there must be no pressure in the system!