manualshive.com logo in svg

Agilent Technologies U3025AE10, Руководство пользователя

Поделиться
Скачать
Agilent Technologies U3025AE10 Скачать руководство пользователя страница 53

46

User’s Guide U3025-90001

U3025AE10

Regulatory Information

Regulatory Information 

Instrument Markings

This section contains information that is required by various government regulatory 
agencies.

The instruction documentation symbol. The product is marked with this symbol 
when it is necessary for the user to refer to the instructions in the documentation.

This symbol indicates separate collection for electrical and electronic equipment, 
mandated under EU law as of August 13, 2005. All electric and electronic equipment 
are required to be separated from normal waste for disposal (Reference WEEE 
Directive, 2002/96/EC).   

This symbol indicates that the instrument requires alternating current (ac) input.

This symbol indicates that the power line switch is ON.

This symbol indicates that the power line switch is in the STANDBY position.

This symbol indicates that the power line switch is in the OFF position.

This symbol is used to identify a terminal which is internally connected to the 
product frame or chassis.

The CE mark is a registered trademark of the European Community. (If accompanied 
by a year, it is when the design was proven.)

The CSA mark is a registered trademark of the CSA International. This instrument 
complies with Canada: CSA 22.2 No. 61010-1-04.

This is a symbol of an Industrial Scientific and Medical Group 1 Class A product.

This is a marking to indicate product compliance with the Canadian 
Interference-Causing Equipment Standard (ICES-001).

Direct Current.

IP 2 0

The instrument has been designed to meet the requirements of IP 2 0 for egress and 
operational environment.

This is a required mark signifying compliance with an EMC requirement. The C-Tick 
mark is a registered trademark of the Australian Spectrum Management Agency.

China RoHS regulations include requirements related to packaging, and require 
compliance to China standard GB18455-2001.

This symbol indicates compliance with the China RoHS regulations for 
paper/fiberboard packaging.

ICES/NMB-001 

This Manual:http://www.manuallib.com/agilent/u3025ae10-test-set-user-guide.html

Содержание U3025AE10
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды