manualshive.com logo in svg

Agilent Technologies U3025AE10, Руководство пользователя

Поделиться
Скачать
Agilent Technologies U3025AE10 Скачать руководство пользователя страница 50

User’s Guide U3025-90001

43

 U3025AE10

Safety and Regulatory Information

Before Applying Power

Verify that the premises electrical supply is within the range of the instrument. The 
instrument has an autoranging power supply.

WARNING

If this product is not used as specified, the protection provided by the 
equipment could be impaired. This product must be used in a normal 
condition (in which all means for protection are intact) only.

CAUTION

The Mains wiring and connectors shall be compatible with the connector used 
in the premise electrical system. Failure, to ensure adequate earth grounding 
by not using the correct components may cause product damage, and serious 
injury.

CAUTION

This product is designed for use in Installation Category II and Pollution 
Degree 2.

CAUTION

Before switching on this instrument, make sure the supply voltage is in the 
specified range.

CAUTION

Verify that the premise electrical voltage supply is within the range specified 
on the instrument.

CAUTION

Ventilation Requirements

: When installing the instrument in a cabinet, 

the convection into and out of the instrument must not be restricted. The 
ambient temperature (outside the cabinet) must be less than the maximum 
operating temperature of the instrument by 4 

°

C for every 100 watts 

dissipated in the cabinet. If the total power dissipated in the cabinet is 
greater than 800 watts, forced convection must be used.

CAUTION

This instrument has auto-ranging line voltage input, be sure the supply 
voltage is within the specified range.

This Manual:http://www.manuallib.com/agilent/u3025ae10-test-set-user-guide.html

Содержание U3025AE10
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды