manualshive.com logo in svg

Agilent Technologies U3025AE10, Руководство пользователя

Поделиться
Скачать
Agilent Technologies U3025AE10 Скачать руководство пользователя страница 49

42

User’s Guide U3025-90001

U3025AE10

Safety and Regulatory Information

Safety and Regulatory Information 

Introduction

Review this product and related documentation to familiarize yourself with safety 
markings and instructions before you operate the instrument. The documentation contains 
information and warnings that must be followed by the user to ensure safe operation and 
to maintain the product in a safe condition.

Safety Earth Ground

WARNING

This is a Safety Class I product (provided with a protective earthing ground 
incorporated in the power cord). The mains plug shall be inserted only into 
a socket outlet provided with a protective earth contact. Any interruption 
of the protective conductor, inside or outside the product is likely to make 
the product dangerous. Intentional interruption is prohibited.

CAUTION

Always use the three prong AC power cord supplied with this product. Failure 
to ensure adequate earth grounding by not using this cord may cause product 
damage and the risk of electrical shock.

Declaration of Conformity

A copy of the Declaration of Conformity is available upon request, or a copy is available on 
the Agilent Technologies web site at  

http://regulations.corporate.agilent.com/DoC/search.htm

Statement of Compliance

This instrument has been designed and tested in accordance with CAN/CSA 22.2 
No. 61010-1-04, UL Std. 61010-1 (2nd Edition), and IEC 61010-1 (Second Edition).

 

This Manual:http://www.manuallib.com/agilent/u3025ae10-test-set-user-guide.html

Содержание U3025AE10
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды