manualshive.com logo in svg

Agilent Technologies U3025AE10, Руководство пользователя

Поделиться
Скачать
Agilent Technologies U3025AE10 Скачать руководство пользователя страница 14

User’s Guide U3025-90001

7

 U3025AE10

General Specifications

Environmental Requirements 

Refer to the PNA-L or PNA-X standard documentation for environmental requirements.

Environmental Tests

The Test Set complies with all applicable safety and regulatory requirements for the 
intended location of use.

• Pressure Altitude (Operation)

3,000 meters (~10,000 feet)

• The instrument can safely operate in a relative humidity of 80% for temperatures to 

31 degrees C, decreasing linearly to 50% relative humidity at 40 degrees C.

Equipment Heating and Cooling

If necessary, install air conditioning and heating to maintain the ambient temperature 
within the appropriate range. 

CAUTION

Ventilation Requirements: When installing the instrument in a cabinet, the 
convection into and out of the instrument must not be restricted. The ambient 
temperature (outside the cabinet) must be less than the maximum operating 
temperature of the instrument by 4 

°

C for every 100 watts dissipated in the 

cabinet. If the total power dissipated in the cabinet is greater than 800 watts, 
forced convection must be used.

Required Conditions for Accuracy Enhanced Measurement

Accuracy–enhanced (error–corrected) measurements require the ambient temperature of 
the PNA and Test Set to be maintained within ± 1 °C of the ambient temperature at 
calibration.

Dimensions and Space Requirements 

Standard installation of the Test Set and PNA includes configuration and installation on a 
customer provided lab bench or table top of adequate size and strength. For weight, 
dimensions and space requirements, refer to the network analyzer documentation that is 
used to configure the Test Set.

Table 2

 Instrument Dimensions 

Model

Weight

Height

Width

Depth

U3025AE10

12.7 kg (28 lb) 

19.1 cm 
(7.5 in)

42.5 cm 
(16.7 in)

42.6 cm 
(16.8 in)

This Manual:http://www.manuallib.com/agilent/u3025ae10-test-set-user-guide.html

Содержание U3025AE10
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды