Scope Features and Functions
2
U2701A/U2702A USB Modular Oscilloscopes User’s Guide
77
To pan an acquired waveform
1
Click on the Stop button to stop the signal acquisition.
2
Go to Analog panel by clicking the Analog button on the
toolbar or press Ctrl + 1.
3
On Delay panel, use the
or
arrow key to pan your
graph right or left. You may also turn the knob to control the
panning.
To know if there is any panning movement, use the analog
trigger point on the graph as highlighted in
as
the point to mark a specific location of the waveform.
Figure 2-21
Panning a waveform
U2700A_Modular_Scope.book Page 77 Tuesday, May 6, 2008 9:32 AM
